View 23-215A-BHC-DN2P2E-5A_240923.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Technical Data Sheet Reverse Package Chip LED
23-215A/BHC-DN2P2E/5A
Features
Package in 8mm tape on 13diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-Free. The product itself will remain within RoHS compliant version.
Descriptions
The 23-215A SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use.
Device Selection Guide Part No.
23-215A/BHC-DN2P2E/5A
Chip
Material InGaN Emitted Color Blue
Resin Color Water Clear
Everlight Electronics Co., Ltd. Device No. : DSE-0000738
http://www.everlight.com Prepared date: 14-Jan-2009
Rev. 1
Page: 1 of 10
Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Package Outline Dimensions
3.2 2.0
0.6
2.0
0.6
0.2
0.6
0.8
Cathode Mark
1.0
2.4
1.0
Note: The tolerances unless mentioned is 0.1mm,Unit = mm
Everlight Electronics Co., Ltd. Device No. : DSE-0000738
http://www.everlight.com Prepared date: 14-Jan-2009
Rev. 1
Page: 2 of 11
Prepared by: Betty Lin
0.8
23-215A/BHC-DN2P2E/5A
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 25 100 95 150 -40 ~ +85 -40 ~ +90 Unit V mA mA mW V
Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec.
Everlight Electronics Co., Ltd. Device No. : DSE-0000738
http://www.everlight.com Prepared date: 14-Jan-2009
Rev. 1
Page: 3 of 11
Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Electro-Optical Characteristics (Ta=25)
Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol Iv 21/2 p d VF IR Min. 36 ------466 ---2.75 ---Typ. ---130 468 ---25 ------Max. 72 ------472 ---3.65 50 Unit mcd deg nm IF=20mA nm nm V A VR=5V Condition
Notes:
1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V
Everlight Electronics Co., Ltd. Device No. : DSE-0000738
http://www.everlight.com Prepared date: 14-Jan-2009
Rev. 1
Page: 4 of 11
Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Bin Range Of Luminous Intensity
Bin N2 P1 P2 Min 36 45 57 Max 45 57 72 mcd IF=20mA Unit Condition
Bin Range Of Dom. Wavelength
Group D Bin AA2 AA3 AA4 Min 466 468 470 Max 468 470 472 nm IF=20mA Unit Condition
Bin Range Of Forward Voltage
Group E Bin 5 6 7 Min 2.75 3.05 3.35 Max 3.05 3.35 3.65 V IF=20mA Unit Condition
Notes:
1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V
Everlight Electronics Co., Ltd. Device No. : DSE-0000738
http://www.everlight.com Prepared date: 14-Jan-2009
Rev. 1
Page: 5 of 11
Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Typical Electro-Optical Characteristics Curves
Spectrum Distribution Relative luminous intensity (%) Forward Current IF (mA) 100 75 Ta=25C Forward Current vs. Forward Voltage
Ta=25C
50 40 30 25 20 10 0 2.6
50 25
0
400
450
500
550
600
3.0
3.4
3.8
4.2
4.5
Wavelength (nm) Luminous Intensity vs. Relative luminous intensity (%) 1000 Ambient Temperature Relative luminous intensity (%) 1000
Forward Voltage VF (V) Luminous Intensity vs. Forward Current
f=1KHz Duty=1/10
Ta=25C
100
100
10
10
1 -60 -40 -20
0 20 40 60 80 100
1 10
10
1
10
2
Ambient Temperature Ta (C) Forward Current Derating Curve Forward Current IF (mA)
Forward Current IF (mA) Radiation Diagram 0 10 Ta=25C 20 30
50 40 30 25 20 10 0 0 20
1.0 0.9 0.8 0.7
40 50 60 70 80 90 0.5 0.3 0.1 0.2 0.4 0.6
40
60
85
100
Ambient Temperature Ta (C)
Everlight Electronics Co., Ltd. Device No. : DSE-0000738
http://www.everlight.com Prepared date: 14-Jan-2009
Rev. 1
Page: 6 of 11
Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Label Explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Pb
EVERLIGHT
RoHS
CAT : XXX HUE : XXX REF : XXX
CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
MSL-2
MADE IN TAIWAN
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No. : DSE-0000738
http://www.everlight.com Prepared date: 14-Jan-2009
Rev. 1
Page: 7 of 11
Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Carrier Tape Dimensions: Loaded quantity 5000 PCS per reel
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No. : DSE-0000738
http://www.everlight.com Prepared date: 14-Jan-2009
Rev. 1
Page: 8 of 11
Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10%
No. 1
Items Reflow Soldering
Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.
Ac/Re 0/1
2
Temperature Cycle
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS.
0/1
4 5 6 7
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No. : DSE-0000738
http://www.everlight.com Prepared date: 14-Jan-2009
Rev. 1
Page: 9 of 11
Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No. : DSE-0000738
http://www.everlight.com Prepared date: 14-Jan-2009
Rev. 1
Page: 10 of 11
Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No. : DSE-0000738
http://www.everlight.com Prepared date: 14-Jan-2009
Rev. 1
Page: 11 of 11
Prepared by: Betty Lin

▲Up To Search▲

Price & Availability of 23-215A-BHC-DN2P2E-5A

	To Download 23-215A-BHC-DN2P2E-5A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .